• January 25, 2022
75mm Pir Insulation

75mm Pir Insulation

75mm Pir Insulation-75mm Kstratherm Thin-R PIR Filter
Kstratherm Thin-R KST / PR

75mm Pir Insulation-Kstratherm Thin-R line of polyisocyanurate (PIR) insulation with high-quality foil with a temperature resistance of no less than 0.022 V/mK. Slim R pitched roof KST/PR (ventilated, hybrid or warm) on sliding roofs gives the best U-V values ​​with minimal interference in critical areas. Roof construction is an important factor in the structure of the house and the area has a high risk of heart. Using KST/PR will reduce thermal conductivity while providing the best thermal communication information. Building a heated roof is the only way to insulate complex roofs. Cleaning between or above and between the roof beams ensures that the structure is placed in or near the environment to reduce the risk of overheating and thickening.

Thickness: 75mm
Umi: 2400 mm
Width: 1200mm
Overall thickness: 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 60mm, 65mm, 70mm, 75mm, 80mm
90mm, 100mm, 110mm, 120mm, 130mm, 140mm, 150mm, 160mm, 165mm
Weight plate: 2.25 kg / m2
Temperature resistance: 3.41m2K / V
Temperature range: 0.022 V/mK
Compressive strength: > 150 kPa
Water vapor resistance: >100 MNs/gm
Heavy (foam core): 30-32 kg/m3
Combustion Propagation: Class 1

Tali Afi:

Most important points:
Avoid entering residential areas.
Reduces the risk of weight gain
See the form for the sub-reserve
Clean and easy to install
Low-temperature shade

Handling, cutting, and storing
Xtratherm insulation should be stored away from the ground, on a clean surface, and under a shelter. Polyethylene film is not suitable for exterior protection.
Experience. Insulation safety must be maintained during storage and during construction. It can be cut easily with a sharp cutting knife or.
fine toothpaste. Ensure proper installation of insulation boards to ensure continuous insulation as required in ACDs. When using a mask, PPE must be worn correctly.
See the health and safety information on our website. The plates are packed in polyethylene boxes with information on each label about the class/type, size, and a number of pieces of paper in the stack.

Receive


Xtratherm products are stable, root certified, and will last a lifetime depending on specifications and installation. Care must be taken to avoid contact with chemicals.
Gasoline, alcohol, and mineral oil, if in contact, clean items safely before installation.

75mm Kstratherm Thin-R PIR Filter

Leave a Reply

Your email address will not be published. Required fields are marked *