• January 25, 2022
15mm PIR insulation

15mm PIR insulation

15mm PIR insulation Xtratherm Thin-R PIR Rigid Insulation Board


15mm PIR insulation-15mm xtratherm insulation board range is a high-performance foil-faced Polyisocyanurate (PIR) insulation with a certified thermal conductivity as low as 0.022 W/mK. Thin-R Pitched Roof XT/PR on sloped roofs (ventilated, hybrid or warm) provides the most efficient U-values with minimal intrusion into valuable living space.

The roof construction is a critical element in the building fabric and is an area at high risk of heat loss. Using XT/PR will reduce heat loss while also delivering excellent thermal bridging details. Warm Roof construction is a particularly effective way of insulating complex roofs. Insulating above – or above and between – the roof timbers ensures that the structure is kept at or near the internal environmental conditions, reducing thermal stress and condensation risk.

Product Details

Thickness : 15mm
Lenght: 2400mm
Width: 1200mm
Overal Thickness: 15mm,20mm,25mm,30mm,35mm,40mm,45mm,50mm,60mm,65mm,70mm,75mm,80mm
90mm,100mm,110mm,120mm,130mm,140mm,150mm,160mm,165mm
Maximum board weight: 0.45 kg/m2
Thermal Resistance : 0.68m2K/W
Thermal conductivity: 0.022 W/mK
Compressive strength: >150 kPa
Water Vapour Resistivity: >100 MNs/gm
Density (Foam Core):30-32 Kg/m3
Surface spread of flame: Class 1
Reaction to fire: E

Key Facts:

Avoids Intrusion into Living Area
Reduced Risk of Condensation
Low Emissivity Foil Facings
Lightweight and Easy to Install
Reduced Thermal Bridging

Handling, Cutting and Storage

Xtratherm 15mm per insulation should be stored off the ground, on a clean flat surface, and must be stored undercover. Polythene wrapping is not considered adequate protection for outside
exposure. Care should be taken to protect the insulation in storage and during the build process. The insulation boards can be readily cut using a sharp knife or
fine-toothed saw. Ensure tight fitting of the insulation boards to achieve continuity of insulation as asked for within the ACDs. Appropriate PPE should be worn when handling insulation.
Please refer to Health & Safety data sheets on our website. The boards are wrapped in polythene packs and each pack is labeled with details of grade/type, size, and a number of pieces per pack.

Durability

Xtratherm PIR products are stable, rot-proof, and will remain effective for the life span of the building, dependent on specification and installation. Care should be taken to avoid contact with acids,
petrol, alkalis, and mineral oil, when contact is made, clean materials in a safe manner before installation. If you want to buy or have any questions about the 15mm Xtratherm PIR Rigid Insulation Board please call us on 02038839057! You can also text us back in our live chat.

Please find all datasheets in PDF & BROCHURES section.

Bee with us!! 

Sales@insulationbee.co.uk

Building Materials Shop

Leave a Reply

Your email address will not be published. Required fields are marked *